What Else Should We Consider When Selecting a DIN Rail Power Supply?
-The input and output parameters of the DIN rail power supply should be your initial knowledge point.
Do you need electricity for a single- or three-phase system? Does the power supply also need the ability to accept DC input voltage?
What voltage and current must the output have? Do you want to use a single or parallel power supply? Unfortunately, not all DIN rail power supplies are inherently capable of parallel operation.
-The operating environment of DIN rail power supplies, double standard, describes the operating environment of DIN rail power supplies. What are the average and maximum temperatures of the environment? Note that most power supplies must be derated at a certain temperature and will no longer give full power.
Is the application situated in a damp, dirty, or vibrating environment? Then, it is suggested to investigate the DIN rail power supply with conformal coating on PC boards.
-Dimensions of DIN rail power supplies, knowing the exact size helps make selecting the appropriate power supply simpler.
How much accessible space is there for the DIN rail power supply? Can the power supply also be mounted in a standard vertical orientation? If the power supply can only be mounted horizontally, ventilation will be compromised, and derating may be necessary.
The space between the left and right sides of the power unit must be maintained so that air can flow and the unit remains as cool as feasible. For example, consider the distances stated in the instruction manual and data sheet while designing the cabinet.
-DIN rail power supply approval? Lack of permission may significantly slow down a project. Consequently, it is essential to know which approvals the power supply must possess in advance.
How long does a DIN rail power supply last, and how efficient is it? Long lifespan, low heat output, and good energy efficiency are essential for every application.
Efficiency has a direct bearing on each of the elements above. Consequently, it is essential to evaluate the needed load’s efficiency and account for power losses. The greater the system’s efficiency, the less electricity is lost in heat. Effective DIN rail power supply maintains a low temperature even when fully loaded, which benefits the surrounding system components. In addition, a significant aspect of prolonging the life of the power supply is its high efficiency. For instance, a 10°C increase in temperature may halve the lifespan of an electrolytic capacitor. These electrolytic capacitors significantly affect the durability of the DIN rail power supply.
Your application will get the most from a DIN rail power supply with maximum efficiency over the whole load range. Learn more about Mornsun power supply by reading the datasheet for each product, which contains information on its efficiency.
-Supplemental units for DIN rail power supplies: Does your system need additional units to enhance its dependability or availability? For instance, this might be accomplished by installing a redundant power system or using an uninterruptible power supply.
In this scenario, purchasing a power supply and matching accessories from the same manufacturer might be advantageous. Typically, the components are exactly synced, which facilitates installation. Mornsun provides consumers with a selection of additional units that are compatible.